No suitable position found for drift compensation
Status 123
Description
After alignment against the starting wall, the cleaning robot starts moving forwards. It detects a track end before it has reached a sufficiently level position*
for the drift compensation. This means that direction switching is activated while the appliance is moving away from the starting wall.
*A level position is any position with less than 10° inclination.
Measures
- On the control console: Press the ESC button
- On the radio remote control: Press the STOP button
- Re-start appliance at a level position
- Check which direction switching is activated (inclination, current or shock). Adjust settings for the direction switching (reduce sensitivity), see "Direction switching" in the manual
Contact service
